Friday, December 2, 2011
Sunday, November 27, 2011
Fuji X100 with CPL filter.
X100 have an adapter ring, so you can attach a filter. The ring size is 49mm. I attached a CPL filter, and did some test shots here:
without CPL:
with CPL:
without CPL:
with CPL:
Saturday, November 26, 2011
Friday, November 25, 2011
Sunday, November 20, 2011
Fuji X100 ND filter
To shoot with f2.0 under bright sun light, you have to turn the ND filter ON, the X100 ND filter is a 3 stop filter can reduce 1/8 light, it is very helpful.
Saturday, November 19, 2011
Fuji X100's weakness & workaround.
I have many problems with the X100 focusing system, even MF is a pain to turn the dail.
But I found a good blog post from Steve that comes with really great tips to workaround all the problems in X100.
If you own an X100, be sure to check this out:
http://www.stevehuffphoto.com/2011/05/11/the-top-7-complaints-of-the-fuji-x100-and-how-i-get-around-them-by-steve-huff/
Friday, November 18, 2011
Fuji X100 ISO 800 Low Light Samples.
Fuji X100 has larger sensor and thus the noise @ high ISO is bearable. Let's check out the following photos shoot @ ISO800 f/2.0.
Thursday, November 17, 2011
Focus Handling.
When I first play with Fuji X100, I really love the hybrid viewfinder (OVF). But there are two limitations of using the OVF:
1) No Manual Focus (When you move the focus ring, the OVF won't see the focus change), It is normal though:) as it is not a DSLR.
2) Cannot be used for focus less than 80cm.
I love using OVF, but I always have to change to EVF when someone comes closer to my camera. But when the objects can closer and closer (may be approx < 50-60cm), you have to switch the camera to macro mode, it won't focus correctly otherwise. Moreover, there is a strange behavior when the object is between not so close (macro mode) but less than 80 cm, it cannot focus correctly!
Fuji X100 has a new firmware (v1.11), it should address some focus problems, I will try it later.
If you have the same problem, please check the following link:
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/finepix_x100/download.html
1) No Manual Focus (When you move the focus ring, the OVF won't see the focus change), It is normal though:) as it is not a DSLR.
2) Cannot be used for focus less than 80cm.
I love using OVF, but I always have to change to EVF when someone comes closer to my camera. But when the objects can closer and closer (may be approx < 50-60cm), you have to switch the camera to macro mode, it won't focus correctly otherwise. Moreover, there is a strange behavior when the object is between not so close (macro mode) but less than 80 cm, it cannot focus correctly!
Fuji X100 has a new firmware (v1.11), it should address some focus problems, I will try it later.
If you have the same problem, please check the following link:
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/finepix_x100/download.html
Fuji X100 Macro Testing (samples)
Just got my Fuji X100, and do some macro testing photos here.
Macro mode can focus object @ 10cm, Please check the above photo (direct JPEG)
More macro photos:
All Taken @ f/2.0 wide open.
Subscribe to:
Posts (Atom)